|Group||KDL series small air dryer|
|Min. Order||1 piece|
|Terms of Payment||L/C, T/T|
|Cooling type||Air cooled|
|Evaproator||Plate heat exchanger|
|Max inlet temperature||45°C|
KL KDL series are energy saving andenvironment friendly type refrigerated air dryer. It adapts Aluminum plate heatexchanger, mixed the pre-cooled regenerator, evaporator,gas-water separatorinto one. It improves 20% heat exchange efficient compared to other exchanger,then to reach 2-10°C dew point with less consumption along with low maintenance coststo operate.
All-in-one aluminum plate heatexchanger
KDL series refrigeration air dryer is adopted with all-in-onealuminum plate heat exchanger. The air-to-air heat exchanger,air-to-refrigerantheat exchanger (evaporator) and demisterseparator are housed in one aluminum module. It pre-cools the incoming airusing the cold air exiting the refrigerant section. It then final cools the airin the refrigerant section at which point the air stream enters a separationchamber to allow the condensed moisture to fall out. Since the air is reheatedin the regeneration section, the final humidity remains below 25%.
Eco-friendly refrigerant compressor
Each KDL air dryer is equipped with R407C orR134a refrigerant compressor. Scroll compressor offering energy savings of 20-30% when compared with piston compressors. The ability to tolerate liquidreturns coupled with 50% less moving parts render them nearly indestructibleand highly reliable.
Hot-gas by-pass valve
Each model of KDL air dryer is installedwith hot-gas by-pass valve which prevents the freezing inside the evaporator atany load condition. The valve is set during final test and no furtheradjustments are necessary.
Electrical control panel
On/Off switch, Power On light,compressor runlight and Refrigerant Suction gauge are standard on all refrigerated air dryers.
Analog gauges can be added in anycombination to monitor inlet and outlet pressure and inlet and outlet air temperature.
Digital dew point controller is optional for150F and above.
Electrical timed condensate drain
All models are fitted with a timedelectronic drain,discharge and pause times are adjustable.
KDL series :
Max inlet temperature:45oC
|Model||Flow Capacity||Power Cons.(kw)||Conn.||Dimensions||Weight|
|m3/min||m3/h||CFM||(BSP)||L (mm)||W(mm)||H (mm)||(kg)|
Generally 10~12 working days after the order confirmed
1) Custom package request is appreciate.
2) Standard package: Corrugate carton